Ricoh PPC-154 - Manual (Page 37)

29 Chapter 4
4.2 Disassembling the Panel PC
The following are standard procedures for disassembling the panel PC
before you upgrade your system. All procedures are illustrated in Fig.
4-1, 4-2, 4-3 and 4-4.
1.
Unscrew the three screws that secure the plastic side cover, and
then remove it.
Figure 4.1: Unscrew the screw of side cover
2. Unscrew the eight screws that secure the plastic rear cover and then
remove it. Make sure the rear cover is removed from the right side
first
Figure 4.2: Unscrewing rear cover of the panel PC