Ricoh PPC-154 - Manual (Page 33)

25 Chapter 3
3.9 VGA Port
An external VGA-compatible device may be connected to the system
through the 15-pin external port located on the rear of the system unit.
The panel PC simultaneously supports an external CRT monitor in addi-
tion to its own LCD display.
1.
Be sure the panel PC is turned off.
2. Connect the external monitor to the system. (See Fig. 3-5.)
3. Turn on the panel PC and the external monitor.
3.10 Game Port
An external game device may be connected to the system through the 15-
pin external port located on the rear of the system unit.
1.
Be sure the panel PC is turned off.
2. Connect the external joystick or game device to the system. (See
Fig. 3-5.)
3. Turn on the panel PC and the external joystick or game device (if
applicable).
4. Install the driver before you use the joystick or game device.
3.11 USB Ports
An external USB device may be connected to the system through the 4-
pin USB ports located on the rear side of the system unit.
1.
Connect the external device to the system. (See Fig. 3-4.)
2. The USB ports support hot plug-in connection. You should install
the device driver before you use the device.