Ricoh Printer/Scanner Unit Type 8000 - Manual (Page 62)

Sending Scan Files to Folders
54
2
Sending Files to an FTP Server
This section explains how to specify destinations when sending files to an FTP
server.
Entering the path to an FTP server manually
You can enter the path to an FTP server manually.
A
Press [Manual Entry].
B
Press [FTP].
C
Press [Manual Entry] on the right side of the server name field.
The soft keyboard appears.
D
Enter a server name.
Instead of specifying the destination using its path, you can also use its IPv4
address.
E
Press [Manual Entry] on the right side of the path field.
F
Enter the path for the folder.
The following is an example of a path where the folder name is “user” and the
subfolder name is “lib”: user\lib.
G
Press [OK].
H
Enter the user name according to the setting at the destination.
Press [Manual Entry] to the right of the user name field to display the soft key-
board.
I
Enter the password according to the setting at the destination.
Press [Manual Entry] next to the password field to make the soft keyboard ap-
pear.