RCA TruFlat T20TF668 - Manual (Page 11)

Chapter 1 9
Connections & Setup
TV/VCR back panel
VIDEO
LINE IN
ANT/CABLE
75 W
LINE
OUT COMPONENT -IN
IN 1
L
R
L
PR
(CR)
PB
(CB)
AUDIO
AUDIO VIDEO
Y
AUDIO OUT
L R
Y P B P R
COMPONENT
VIDEO OUTPUT
VIDEO S-VIDEO
DVD player back panel
TV/VCR
DVD Player
Connection: TV/VCR + DVD Player
1. Connect your cable or antenna to your TV/VCR
Connect the RF coaxial cable from your cable feed, cable box, or off-air antenna to the
ANT/CABLE jack on the back of your TV/VCR.
2. Connect your DVD Player to your TV/VCR
To achieve the best picture quality, use the COMPONENT INPUT jacks on the back of the
TV/VCR to connect the TV/VCR to your DVD Player.
Note: Recording can’t be done in the COMPONENT INPUT (video/audio) mode.
If your DVD Player doesn’t have Component Jacks, use audio/video cables to connect the TV/VCR to the DVD
Player using the LINE IN VIDEO and AUDIO L and R jacks on the TV/VCR. Instructions for both scenarios follow:
Optimum Connection (illustrated above)
A. Connect three video grade cables to the COMPONENT-IN VIDEO jacks on the back of the TV/VCR – labeled Y,
P
B
(C
B
), P
R
(C
R
).
B. Connect the other ends of the video cables to the corresponding Component Output Jacks on your DVD Player
(sometimes labeled Y, P
b
, P
r
).
C. Connect audio cables to the COMPONENT-IN jacks labeled AUDIO L and R and to the Audio Output jacks on
the DVD Player (sometimes labeled AUDIO OUT L and R).
Normal Connection
A. Connect audio/video cables to the LINE IN/IN 1 jacks on the back of the TV/VCR (labeled VIDEO and AUDIO L
and R). Audio/video cables usually are bundled as a set. Usually, they are color-coded (yellow is video, red is
right audio, and white is left audio).
B. Connect the other ends of the a/v cables to the audio and video output jacks on the back of the DVD Player
(sometimes labeled AUDIO OUT L and R).
Go To Page 11
1
Note: The back of your DVD
player might not look exactly
like the one shown here.
2A
2B
2C
Note: If you have model
T27TF668, the placement
of the jacks is different
from the TV/VCR back
panel illustrated here.
From antenna or cable feed