RCA TruFlat T20TF668 - Manual (Page 18)

16 Chapter 2
The Remote Control
1 2 3
4 5 6
7 8 9
0
ON•OFF TV VCR
DVD
MUTE SKIP
GO BACK SOUND
TIMER INFO
MENU CLEAR
INPUT
REVERSE PLAY FORWARD
RECORD
SLOW – INDEX + SPEED
STOP PAUSE
ANTENNA
AUX SAT•CABLE
OK
CH +
CH
VOL
VOL
VCR2
TRACKING +
TRACKING -
The Buttons on the Remote Control
Your backlit remote has a light button that glows in the dark. Press this
button to light the channel up and channel down (CH +/–) and volume up
and down (VOL </>)buttons. If you don’t press any buttons for several
seconds, the light turns off to conserve battery power.
0-9 (Number buttons) Enter channel numbers directly through the remote.
To enter a 2-digit channel, press the two digits. To enter a 3-digit channel,
press and hold the first digit until two dashes appear on the screen (to the
right of the first number), then add the next two digits. Example: to tune to
channel 123, press and hold 1 until 1– – appears, press 2, then press 3.
ANTENNA button Used to switch between off-air and cable mode in
VCR mode.
Arrow buttons (up, down, right, and left) Press the arrow buttons to
move through the on-screen menus.
AUX button Puts the remote in AUX mode.
CH (+ and –) buttons Scan up or down through stored channels. Press
once to change the channel up or down; press and hold to continue changing
channels. The remote must be in TV mode — press the TV button.
CLEAR button Resets the time counter. The remote must be in VCR mode
— press the VCR button.
DVD button Puts the remote in DVD mode. Operates RCA, GE, and
Proscan DVD Players.
INFO button Displays TV/VCR’s current status. Displays time counter when
a tape is inserted. Press again to remove display.
INPUT button Repeatedly press to select the TV/VCR tuner, or line inputs
(LINE 1 for the rear LINE IN/IN1 jacks, LINE 2 for the front VIDEO, L/MONO,
R jacks or COMPONENT for the COMPONENT jacks).
FORWARD (fast forward) button Fast forwards the tape when the TV/VCR
is stopped. Also searches the picture in forward motion during playback. The
remote must be in VCR mode — press the VCR button.
GO BACK button Returns you to the previous channel. The remote must be
in TV mode — press the TV button.
INDEX (+ and –) buttons Searches for recorded index marks. The remote
must be in VCR mode — press the VCR button.