RCA HD65W40 - Manual (Page 18)

Connections & Setup
16 Chapter 1
CENTER SPEAKER INPUT
• INTERNAL SPEAKER SOURCE - TV / EXT AMP Switch
- TV Position Sound comes from TV’s internal speakers.
- EXT AMP Position Internal speakers are used for an external center
channel. When an external audio/video receiver’s center channel
output is connected to the TV’s center channel input, center channel
audio comes out of the TV’s internal speakers.
• CENTER CHANNEL TERMINALS Connect the audio/video receiver’s
center channel output to the TV’s center channel input. Switch the
INTERNAL SPEAKER SOURCE to EXT AMP position.
VIDEO/AUDIO INPUTS
VIDEO INPUT 1/AUDIO INPUT 1 Connect an NTSC (analog) component.
• V (VIDEO) provides composite video connection and connector is usually
yellow.
• L/MONO AUDIO provides left audio connection and connector is usually
white.
Note: If your component has only one output for audio (mono), connect
it to the left (white L/Mono) audio jack on the TV and don’t connect the
right audio part of the cable.
• R AUDIO provides right audio connection and connector is usually red.
• S-VIDEO lets you connect an S-Video cable for better video quality picture
to a component with S-Video capability, such as a VCR or DVD player.
When using S-Video, make sure to connect the two audio cables as well as
the S-Video connector.
VIDEO INPUT 2/AUDIO INPUT 2 Provides connection to a second NTSC
(analog) video component such as a VCR. The jacks are as described for INPUT 1.
VIDEO INPUT 3/AUDIO INPUT 3 Connect an optional component (Y P
B
P
R
)
video source, such as a DVD player or satellite receiver. Note that it is essential to
match the color coded connectors between a compatible component and the TV.
• AUDIO R/L/MONO The audio jacks provide stereo sound. When connected,
audio volume from the main front and rear speakers are variable.
• V (VIDEO) provides composite video connection and connector is usually yellow.
• Y P
B
P
R
Unlike a single video input, component video maintains the video
signal as three separate parts through these three jacks. To ensure
maximum picture quality, use three video-grade cables for the Y P
B
P
R
connections. Accepts 480i, 480p, 1080i signals. Has priority over V
connection.
VIDEO INPUT 4/AUDIO INPUT 4 Provides connection to a second optional
component video source, such as a DVD player or satellite receiver. The jacks
are the same as described in INPUT 3.
VIDEO
I N P U T 1
AUDIO
I N P U T 1
L/ MONO
R
S-VIDEO
V
VIDEO
I N P U T 3
AUDIO
I N P U T 3
L/ MONO
R
V
P B
Y
P R
Tips
Inputs 3/4 can be used as either a component
video (Y P
B
P
R
) input or a composite video (V)
input. The TV auto detects the connection with
Y P
B
P
R
having highest priority.
PIP cannot be displayed from component
(Y•Pb•Pr) inputs.
INTERNAL
SPEAKER
SOURCE
MAXIMUM AMPLIFIER POWER RATING
(60 WATTS into 8 OHMS)
CENTER CHANNEL INPUT
TV EXT AMP
TV’s CENTER CHANNEL INPUTS
Caution: Do not connect the A/V
receiver’s CENTER CHANNEL
output to the TV’s EXTERNAL
SPEAKERS terminals. Damage to
TV may occur.