Using the tv’s menu system, Auto color, Color warmth – RCA HD65W40 User Manual
Page 59: Noise filter, Convergence
Chapter 4
57
Using the TV’s Menu System
Auto Color
Auto Color minimizes the flesh tone variations of the TV picture. The Auto Color
setting can be stored for each input. Choose On or Off, depending on your
preference.
Color Warmth
Color Warmth automatically adjusts the color temperature of the picture. Color
Warmth can be stored for each input. The feature lets you set one of three
automatic color adjustments:
•
Cool
for a more blue palette of picture colors.
•
Normal
for an ordinary picture color.
•
Warm
for a more red palette of picture colors.
Noise Filter
Noise Filter displays a list that lets you set one of the three settings that allows
you to reduce picture “static” or any type of interference. A Noise Filter setting
can be stored for each input. You can set the Noise Filter to Frame Comb, Off or
Adaptive. The settings are explained in the on-screen help text.
Convergence
The Convergence feature lets you adjust the TV’s three tubes. When the TV tubes’
images are precisely aligned, they create the color images you see on the screen.
Over time, the picture can drift out of alignment (this is normal). If your picture
seems fuzzy or has a yellow tint, using Convergence could correct this
misalignment.
Note: Make sure the TV has been on for at least 30 minutes (TV needs to
warm up for best results) before starting Auto Converge or Red/Blue
Centering.
When you select the Convergence feature, a submenu appears with three options:
•
Auto Converge
automatically aligns the projection lenses to self-correct color images. You’ll
see flashing squares of color dance across the screen (this is normal).
Note: After performing auto convergence, use the Blue Centering and Red Centering
menus to fine tune convergence in the center of the screen, if necessary.
•
Blue Centering
aligns the blue and green images to fine tune the picture.
•
Red Centering
aligns the red and green images to fine tune the picture.
Note: The ability to change channels is disabled when adjusting the convergence options.
The TV must be tuned to a usable signal to converge the picture.