Playback, Dubbing to a vcr – RCA CC9360 User Manual
Page 55
Playback
Chapter 4
53
Dubbing to a VCR
1.
Following the illustration in this chapter, connect the camcorder and the VCR.
2.
Press in the Lock button while setting the camcorder’s Power switch to
, turn on
the VCR’s power, and insert the appropriate tapes in the camcorder and the VCR.
3.
Make sure the VCR is in the appropriate AUX mode and the Record-Pause mode.
4.
Use the camcorder’s Play mode to find a spot just before the edit-in point. Once it is
reached, press
/
on the camcorder.
5.
When you’re ready to start recording, press
/
on the camcorder and press the
appropriate record button on the VCR.
6.
When you want to stop recording, press the VCR’s pause button and press
/
on
the camcorder.
7.
Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder
when finished.