Other information, Video recording – RCA CC9360 User Manual
Page 86
Other Information
84
Chapter 7
Video Recording
•
When the Power switch is set to
A
or
M
and the LCD monitor is opened at an angle
of 25˚ or more, the LCD monitor switches on and the viewfinder switches off
automatically to save power.
•
The cassette tape holder can’t be opened unless a power supply is attached.
•
There may be a delay after you slide OPEN/EJECT until the cassette tape holder
opens. Do not use force.
•
The time required to calculate the remaining tape length, and the accuracy of the
calculation, may vary according to the type of tape used.
•
TAPE END appears when the tape reaches its end, and the power goes off
automatically if left in this condition for 5 minutes.
TAPE END also appears when a tape is loaded and is already at its end.
•
If the Recording Start/Stop button is pressed after the Record-Standby mode has
continued for over 5 minutes, recording may not start immediately.
•
While shooting, sound is not heard from the speaker.