Raritan Computer II - Manual (Page 69)

C HAPTER 7: C ONFIGURATIONS 59
Triangle Configuration
The following procedure must be followed to ensure this configuration functions properly:
− After re-connection, all UMT Matrix Switches must undergo a FUNC reset to clear the switch
database. This procedure should be performed starting from the third tier device down to the base
unit.
− Execute the FUNC reset in the following order: UMT-3A → UMT-2A → UMT-Base 1.
Figure 54 Triangle Configuration
UMT-Base 1
UMT-2A
UMT-3A