Roland HPi-6s - Manual (Page 56)

56
Adding Variety to Your Performances
■ Adding Liveliness to the Sound (Dynamics Sound Control)
You can add liveliness to the sound to give it superb clarity and distinctness.
1.
Press the [Menu/Lesson] button.
The Menu screen appears.
2.
Press the cursor button to select <Functions>, then press the [ ]
button.
3.
Press the cursor button to select <Tone Control>, then press the [ ]
button.
4.
Press the cursor right button to select <Dynamics>.
fig.d-SoundAdjust-e
5.
Press the cursor up or down button to change the dynamics setting.
6.
Press the [ ] button to close the “Tone Control” screen.
Setting Explanation
Off The Dynamics sound control function is switched off.
Sharp Creates a sound with boosted bass and treble.
Clear Creates a clear distinct sound in lower frequency.
Power Creates a sound with boosted bass.
You can use the Memory
Backup function to store this
setting in internal memory (p.
97).
NOTE
For some sounds, this may
cause distortion.
NOTE
Dynamics does not affect the
sound from the Input jack or the
sound of external devices
connected to the MIDI Out
connector.
NOTE
If you use Dynamics Sound
Control when 3D Sound
Control (p. 90) is on, 3D Sound
Control will be turned off.
HPi-6S-e.book 56 ページ ２００７年１１月１９日 月曜日 午前１０時３６分