Roland HPi-6s - Manual (Page 81)

81
Saving the Performance
Preparations for Saving a Song
When saving to USB Memory, connect the USB memory to the external memory
connector.
1.
Press the [Menu/Lesson] button.
2.
Press the cursor button to select <Functions>, then press the [ ]
button.
3.
Press the cursor button to select <File>, then press the [ ] button.
4.
Press the cursor left button to select <Save>, then press the [ ] button.
fig.d-File1-e_50
Saving Songs
A recorded performance is discarded when you switch off the power or choose another song. You can store
recorded song data to optional USB Memory and to the “Favorites.” Be sure to save important songs to USB
Memory or “Favorites.”
What are “Favorites?”
You can register songs you are currently practicing or particularly like to
“Favorites,” allowing you to select these songs easily.
You can register songs recorded with the HPi-6S and songs saved to USB
memory to the “Favorites.” When you register a song on an USB memory to
“Favorites,” you can then play back the song without connecting the USB
memory to the external memory connector.
If a recorded performance is saved to “Favorites,” the performance won’t be
erased when the power is turned off.
If connecting an optional floppy
disk drive, substitute “floppy
disk” wherever the term “USB
memory” appears here.
When using a new storage
media, first initialize (format)
the external memory on the HPi-
6S. Take a look at “Formatting
Media (Format)” (p. 80).
NOTE
Some commercially available
music files cannot be saved
because they are copy
protected.
NOTE
You can’t save a music CD or
audio file to the “Favorites.“
When saving to floppy disks,
first check to make sure that the
floppy disk’s protect tab is set
to the “Write” position (p. 10).
If not handled with care, a
floppy disk and an USB
memory can be damaged, or
the data on it become
corrupted, making playback
impossible. We recommend
saving your songs on two
different media.
When you want to clear all of
the content saved to the
“Favorites” and restore the
settings to the original factory
condition on the HPi-6S, refer to
“Formatting the User Memory
(Initialize User Memory)” (p.
97).
HPi-6S-e.book 81 ページ ２００７年１１月１９日 月曜日 午前１０時３６分