Saving the performance, Using external memory, Connecting an usb memory – Roland HPi-6s User Manual

Page 79: Rotating the external memory connector holder

Advertising
background image

79

Saving the Performance

Connecting an USB Memory

1.

Connect the USB Memory to the External Memory connector.

fig.ConnectUSB1-e

Rotating the External Memory Connector Holder

The External Memory connector holder rotates 90 degrees left and right.

Rotating the External Memory connector holder allows you to avoid damaging the
connected USB Memory if something happens to bump against it.

1.

Grasp the External Memory connector holder and turn it 90 degrees to the
left or right.

fig.ConnectUSB2-2-e

Using External Memory

If you install USB Memory or a floppy disk drive (optional; sold separately), you’ll be able to save songs you’ve
recorded and listen to commercially available music files.

If connecting an optional floppy
disk drive, substitute “floppy
disk” wherever the term “USB
memory” appears here.

If connecting an optional floppy
disk drive, refer to “Installing
the Floppy Disk Drive” (p. 19).

NOTE

Use USB memory and floppy
disk drive available from
Roland. Proper functioning
cannot be guaranteed if other
USB memory products are
used.

External Memory

Connector

NOTE

Be sure to grasp the External
Memory connector holder itself
when rotating it. Never rotate
the External Memory connector
holder by holding the
connected USB memory.

NOTE

Take care not to allow your
fingers to become pinched
when rotating the External
Memory connector holder.

90 degrees
to the left

90 degrees
to the right

External Memory

Connector Holder

HPi-6S-e.book 79 ページ 2007年11月19日 月曜日 午前10時36分

Advertising