Roland DR-3 - Manual (Page 63)

63
Chapter 7 Creating Styles
Ch
ap
ter
7
■ Setting Up the Kit
Changing the kit changes the sounds used in the
style being created.
When setting kit’s variation (p. 36), select <Kit2>
in Step 3 below.
* You can also create kits using the instruments you prefer
(User kits). For more details, refer to “Chapter 10
Creating Your Own Kits” (p. 90).
1. Select the style to be set, then press
[EDIT].
The Edit Menu screen appears.
2. Select a <STYLE>, then press [ENTER].
3. Press [ ], select a <Kit1> or a <Kit2>.
fig.07-07d
4. Turn the VALUE dial to select the kit.
Each contains settings P01–P50 and U01–
U50.
For more on the instrument that make up
each kit, refer to the “Preset Kit List” (p. 106).
5. When you press [EXIT], the setting is
changed, and you’re returned to the
previous screen.
■ Changing the Sound to Be
Muted
When VARIATION [MUTE] is on, this sets the
sound to be played.
If you press VARIATION [MUTE] while the
currently selected style is playing, the sound
selected in this setting is played, and all other
sounds are muted.
1. Select the style to be set, then press
[EDIT].
The Edit Menu screen appears.
2. Select a <STYLE>, then press [ENTER].
3. Press [ ], select a <Mute>.
fig.07-17d
4. Turn the VALUE dial to select the sound
to be performed with VARIATION [MUTE]
is set to ON.
5. When you press [EXIT], the setting is
changed, and you’re returned to the
previous screen.
Item Value
Mute
HH (High Hat and Cymbal), Kick, Bass,
HH&Kc (High Hat & Kick),
Kc&Bs (Kick & Bass),
HH&Bs (High Hat & Bass), Drums