Roland DR-3 - Manual (Page 84)

84
Chapter 8 Creating and Performing Songs ([SONG])
Naming, Copying, and
Deleting Songs
■ Naming the Song
You can edit the name of the currently selected
song, using up to ten characters for the name.
1. Select the song to be set, then press
[EDIT].
The Edit Menu screen appears.
2. Select a <SONG>, then press [ENTER].
3. Press [ ], select a <NAME>, then press
[ENTER].
fig.08-23d
4. Press [ ] [ ] to move to the point
where you want to enter the character(s).
5. Turn the VALUE dial to select the
character.
Each time you press [ENTER], it switches
between upper and lower case for the text
being input.
6. When you press [EXIT] twice, the setting
is changed, and you’re returned to the
previous screen.
■ Copying the Song
1. Press [EDIT].
The Edit Menu screen appears.
2. Select a <SONG>, then press [ENTER].
3. Press [ ], select a <COPY>, then press
[ENTER].
fig.08-24d
4. Turn the VALUE dial to select the number
for the song to be copied, then press
[ ].
fig.08-25d
5. Turn the VALUE dial to select the copy-
destination song number, then press
[ ].
A confirmation screen is displayed.
fig.08-26d
If you press [ ], you’re taken back to the
screen you were in immediately before that.
6. Press [ENTER] to execute the copy.
You can press [EXIT] to cancel the procedure,
and go back to the screen you were in right
before that.
* Note that the copy process may take up to a minute or
more to complete when the data contains exclusive
patterns (p. 78).