Roland DR-3 - Manual (Page 71)

71
Chapter 7 Creating Styles
Ch
ap
ter
7
Naming, Copying, and
Deleting Styles
■ Naming the Style
You can edit the name of the currently selected
style, using up to ten characters for the name.
1. Select the style to be set, then press
[EDIT].
The Edit Menu screen appears.
2. Select a <STYLE>, then press [ENTER].
3. Press [ ], select a <NAME>, then press
[ENTER].
fig.07-24d
4. Press [ ] [ ] to move to the point
where you want to enter the character(s).
5. Turn the VALUE dial to select the
character.
Each time you press [ENTER], it switches
between upper and lower case for the text
being input.
6. Repeat Steps 4–5 as needed.
7. When you press [EXIT] twice, the setting
is changed, and you’re returned to the
previous screen.
■ Copying the Style
This copies the Style to the User styles.
1. Press [EDIT].
The Edit Menu screen appears.
2. Select a <STYLE>, then press [ENTER].
3. Press [ ], select a <COPY>, then press
[ENTER].
fig.07-19d
4. Turn the VALUE dial to select the number
for the Style to be copied, then press
[ ].
fig.07-20d
5. Turn the VALUE dial to select the copy-
destination Style number, then press
[ ].
fig.07-21d
If you press [ ], you’re taken back to the
screen you were in immediately before that.
6. Press [ENTER] to execute the copy.
You can press [EXIT] to cancel the procedure,
and go back to the previous screen.