Clearing patterns, Ch ap ter 7 – Roland DR-3 User Manual
Page 73
73
Chapter 7 Creating Styles
Ch
ap
ter
7
8. Turn the VALUE dial to select the copy-
destination pattern, then press [
].
fig.07-29d
If you press [
], you’re taken back to the
screen you were in immediately before that.
9. Press [ENTER] to execute the copy.
You can press [EXIT] to cancel the procedure,
and go back to the previous screen.
■ Clearing Patterns
This clears the specified pattern.
1. Press [EDIT].
The Edit Menu screen appears.
2. Select a <STYLE>, then press [ENTER].
3. Press [
], select a <PATTERN>, then
press [ENTER].
4. Press [
], select a <CLEAR>, then
press [ENTER].
fig.07-30d
5. Turn the VALUE dial to select the Style,
then press [
].
fig.07-31d
6. Turn the VALUE dial to select the pattern
to be cleared, then press [
].
fig.07-31d
If you press [
], you’re taken back to the
screen you were in immediately before that.
7. Press [ENTER] to execute the clearing.
You can press [EXIT] to cancel the procedure,
and go back to the previous screen.