Ricoh Aficio MP 2500 - Manual (Page 79)

The Printer Function
71
6
When a Message Is Displayed
This section describes the principal messages that appear on the display panel.
If a message not described here appears, act according to the message.
Note
❒ Before turning the main power off, see “Turning On the Power”, About This
Machine.
Reference
“Turning On the Power”, About This Machine
Status messages
This section describes the machine status messages.
Message Status
Ready This is the default ready message. The machine is ready for use.
No action is required.
Waiting... The machine is waiting for the next data to print. Wait a while.
Offline The machine is offline. To start printing, switch the machine on-
line by pressing the {Online} key on the control panel.
Please wait... This message may appear for a second or two while the ma-
chine is preparing, performing initial adjustments, or adding
toner. Wait a while.
Hex Dump Mode In Hex Dump mode, the machine prints received data in hexa-
decimal format. Turn off the machine after printing, and then
turn back on.
Resetting Job... The machine is resetting the print job. Wait until “ Ready ” ap-
pears on the display.
Setting change... The machine is setting changing. You cannot use the control
panel while this message is displayed. Wait a while.