Access control on the speedtouch, Chapter 4 – RCA 605 User Manual
Page 101
91
E-DOC-CTC-20051017-0151 v1.0
Chapter 4
Basic Configuration
5
In the WPA Version list, click the desired WPA version.
6
Click Apply to immediately apply your changes.
7
Configure your wireless client(s) with the same settings.
Access control on the
SpeedTouch™
The following modes are available:
New stations are allowed (automatically):
All New stations can access the SpeedTouch™ WLAN.
New stations are allowed (via registration):
Only allowed stations in the Access Control List (ACL) have access. You can
add new stations via registration.
For more information, see
“ Allowing new wireless” on page 92
New stations are not allowed:
Only allowed stations in the Access Control List (ACL) have access.
Depending on the WPA version you choose, one of the following WPA
encryption will be set automatically:
WPA: TKIP
WPA2: AES
WPA+WPA2: TKIP+AES