6 debug, Tear down all tunnels, Debug – RCA 605 User Manual
Page 192: Chapter 5
182
E-DOC-CTC-20051017-0151 v1.0
Chapter 5
Expert Configuration
5.7.6 Debug
Status page
This page shows the status of the IKE Security Association (Phase 1) and the IPSec
Security Association(s) (Phase 2). For an operational VPN connection, both an IKE
Security Association and an IPSec Security Association should be active.
Statistics page
This page shows the amount of traffic carried over the IKE Security Association
(Phase 1) and the IPSec Security Association(s) (Phase 2).
Logging page
On the Logging page you can monitor the received and transmitted messages of
the IKE and IPSec negotiations.
Proceed as follows:
1
Browse to Expert mode > VPN > Debug > Logging.
2
Select the desired level of Trace Detail. Select high to see the most detailed
level of logging.
3
Start the VPN connection.
4
Browse again to Expert mode > VPN > Debug > Logging.
Tear Down All Tunnels
On this page you can halt all established VPN tunnels.