Document Outline

• Contents
• About this User’s Guide
  • Used symbols
  • Terminology
  • Documentation and software updates
• 1 Getting to know your SpeedTouch™
  • Introduction
  • Installation
  • Configuration
  • Before you begin
  • 1.1 SpeedTouch™ LED Behaviour
    • Front panel LEDs
    • Ethernet LEDs
  • 1.2 Accessing your SpeedTouch™
    • Access methods
    • 1.2.1 Access via the Web Interface
      • To access the SpeedTouch™ via the Web interface
    • 1.2.2 Access via CLI
      • To access the SpeedTouch™ via the Command Line Interface (CLI)
      • To start a Telnet session
    • 1.2.3 Access via FTP
      • To access the SpeedTouch™ via the File Transfer Protocol (FTP)
      • File system
      • To open an FTP session
      • File system structure
      • File system access rights
      • Common FTP commands
      • FTP file transfer
      • Quote site command
    • 1.2.4 Remote Assistance
      • To access the SpeedTouch™ remotely
      • To enable remote access
      • To disable remote access
• 2 Local Network Setup
  • Introduction
  • Device settings
  • 2.1 Wired Ethernet
    • Local network
    • Standard wiring procedure
    • Ethernet link check
    • Device settings
    • Managed Ethernet switch
  • 2.2 Wireless Ethernet
    • Introduction
    • Wireless client requirements
    • 2.2.1 Wireless Basics
      • 802.11b/g
      • Wireless Fidelity
      • Access Point
      • Network Name or SSID
      • Radio channels
      • Antennas
    • 2.2.2 Connecting Wireless Clients for the First Time
      • Wireless default settings
      • To prepare wireless clients for the first time
      • To configure wireless clients for the first time
      • First-time association example
    • 2.2.3 Wireless Security
      • Introduction
      • Security settings
      • Network Name (SSID)
      • Access Control List (ACL)
      • Data encryption
    • 2.2.4 Connecting Additional Wireless Clients
      • Preconditions
      • Security issues
      • Registering wireless clients
      • Registering clients via Web pages
      • Registering clients via the association button
    • 2.2.5 Extending the Range of Your Wirelstess Network
      • Wireless Distribution System (WDS)
      • Preconditions
      • To configure WDS
• 3 Internet Connectivity Dial-In Clients
  • Introduction
  • Access methods
  • Connection protocols
  • Dial-in clients
  • Embedded PPP dial-in clients
  • Broadband host PPPoE dial-in clients
  • 3.1 SpeedTouch™ Web Pages
    • Introduction
    • Starting an Internet session
    • Monitoring your Internet connection
    • Terminating an Internet session
  • 3.2 Internet Gateway Device Control Agent
    • Introduction
    • Preconditions
    • Starting an Internet session
    • Internet connection status
    • Terminating an Internet session
• 4 Basic Configuration
  • Embedded
  • Basic and Expert Mode
  • SpeedTouch™ documentation
  • 4.1 Navigation
    • Navigation components
    • 4.1.1 Menu
      • Menu items
      • Collapsing and expanding the menu
    • 4.1.2 Language Bar
      • Language bar
    • 4.1.3 Navigation Bar
      • Navigation bar
      • Display level
    • 4.1.4 Notification Area
      • Notification area
    • 4.1.5 Tasks
      • Tasks
  • 4.2 Home
    • SpeedTouch™ home page
  • 4.3 SpeedTouch
    • The SpeedTouch menu
    • The SpeedTouch page
    • 4.3.1 Information
      • Information
    • 4.3.2 SpeedTouch™ Easy Setup
      • Easy Setup Wizard
    • 4.3.3 Restart
      • Restarting your SpeedTouch™
    • 4.3.4 Configuration
      • Overview
      • Details
      • Configure
    • 4.3.5 Back up & Restore
      • Introduction
      • Accessing the Backup & Restore page
      • Saving your current configuration
      • Restoring a previously saved configuration
    • 4.3.6 Reset to Factory Defaults
      • Introduction
      • Resetting the SpeedTouch™ factory defaults
    • 4.3.7 Event Logs
      • Event Logging
      • Recorded Events
      • Category
    • 4.3.8 Update
      • Updating the SpeedTouch™ system software
  • 4.4 Broadband Connection
    • The Broadband Connection menu
    • The Broadband Connection page
    • 4.4.1 Connectivity Check
      • Introduction
      • Checking your Internet connectivity
      • Analysing the test results
    • 4.4.2 DSL Connection
      • Overview
      • Details
    • 4.4.3 Internet Services
      • Internet Services information
    • 4.4.4 Internet Service Settings
      • Accessing the Internet Service Settings page
      • Overview
      • Details
  • 4.5 Toolbox
    • The Toolbox menu
    • The Toolbox page
    • 4.5.1 Remote Assistance
      • Enabling Remote Assistance
      • Terminating remote assistance
    • 4.5.2 Game & Application Sharing
      • Overview
      • Configure
    • 4.5.3 Defined Games & Applications
      • Accessing the Defined Games & Applications page
      • The Defined Games & Applications page
    • 4.5.4 Game or Application Definition
      • Accessing the Game or Application Definition page
      • Overview
      • Configure
      • Adding a Port Translation rule
    • 4.5.5 New Game or Application
      • Creating a new game or application
    • 4.5.6 Web Site Filtering
      • Web Site Filtering
      • Overview
      • Configure
      • Content levels
      • Deny access to a specific Web site
      • Allow access to a specific Web site
      • Redirect a Web site
      • Redirecting all Web sites
      • Configure content based filtering settings
    • 4.5.7 Web Filtering Activation
      • Accessing this page
      • Web Filtering Activation page
      • Standard license activation
    • 4.5.8 Content Level
      • Accessing the Content Level page
      • Overview
      • Configure
    • 4.5.9 New Content Level
      • Accessing the New Content Level page
      • Procedure
      • Content level creation
      • Content level configuration
      • Content level definition
      • Content level activation
    • 4.5.10 Firewall
      • About the firewall
      • Overview
      • Configure
      • Security Levels
      • Details of a security level
      • Creating a new security level
      • Editing a security level
    • 4.5.11 Intrusion Detection
      • Intrusion Detection
    • 4.5.12 Dynamic DNS
      • Dynamic DNS
      • Overview
      • Configure
    • 4.5.13 User Management
      • Overview
      • Configure
      • Types of users
    • 4.5.14 Edit User
      • Editing a user account
    • 4.5.15 Change Default User
      • The Default User page
      • Changing the default user
    • 4.5.16 Add User
      • Adding users
  • 4.6 Office Network
    • Office Network Menu
    • The Office Network page
    • Viewing (wireless) client information
    • 4.6.1 Devices
      • Overview
      • Configure
    • 4.6.2 Device Settings
      • Accessing the device settings page
      • Overview
      • Configure
    • 4.6.3 Assign Public IP
      • Introduction
      • Assigning the public IP address to a device
    • 4.6.4 Wireless Device Settings
      • Availability
      • Accessing the wireless device settings page
      • Overview
      • Configure
    • 4.6.5 Access Point Settings
      • Availability
      • Accessing the Access Point settings
      • Overview
      • Details
      • Configure
      • WEP
      • WPA-PSK
      • WPA Encryption
      • Access control on the SpeedTouch™
      • Allowing new wireless
    • 4.6.6 Configuring WDS
      • Availability
      • What is WDS
      • Configuring WDS
      • Establishing a WDS connection
    • 4.6.7 Interfaces
      • Interfaces overview
    • 4.6.8 Interface Settings
      • Overview
      • Configure
      • Assigning a new IP address to the SpeedTouch™
    • 4.6.9 DHCP Pool
      • DHCP Pool page
      • Accessing the DHCP Pool page
      • Components of the DHCP Pool page
• 5 Expert Configuration
  • Introduction
  • Web GUI overview
  • Expert Mode navigation
  • 5.1 Home
    • Overview
  • 5.2 SpeedTouch™
    • Overview
    • 5.2.1 Easy Setup
      • Introduction
    • 5.2.2 System Information
      • Overview
      • Diagnostics
      • DSL Line Info
      • Configuration
      • System
    • 5.2.3 Connections
      • Overview
      • Connections
      • Start/stop PPP sessions
    • 5.2.4 Diagnostics
      • Overview
    • 5.2.5 Syslog
      • Overview
      • Messages
      • Configuration
      • Facility
      • Severity
    • 5.2.6 System Update
      • Overview
      • System configuration
      • Upload system files
      • Manage configuration files
      • Manage language packs
      • System Upgrade
      • Upload system software
      • Switch to another system software version
    • 5.2.7 SpeedTouch™ Services
      • Overview
      • Edit SpeedTouch™ service properties
      • SpeedTouch™ service types
    • 5.2.8 SNTP
      • Overview
      • SNTP Client
      • Manual
    • 5.2.9 SLA
      • Overview
      • Ping
      • Add/delete a ping test
      • Modify ping test properties
      • Ping tests and results
      • Traceroute
      • Add/delete a traceroute test
      • Modify traceroute test properties
      • traceroute tests and results
    • 5.2.10 Add-on
      • Overview
  • 5.3 IP Router
    • Overview
    • 5.3.1 IP Addresses
      • Overview
      • Add/change an IP address
    • 5.3.2 Expressions
      • Overview
      • Interface
      • Adding an interface related expression
      • IP
      • Adding an IP related expression
      • Service
      • Adding a service related expression
    • 5.3.3 Classification
      • Overview
      • Labels
      • Routing Rules
      • IP QoS Rules
    • 5.3.4 IP Routing
      • Overview
      • Adding an IP route
      • Deleting an IP route
    • 5.3.5 RIP
      • Overview
      • Configuration
      • Interfaces
      • Neighbours
    • 5.3.6 NAT
      • Overview
      • Interfaces
      • Mappings
      • Creating a NAT mapping
      • Templates
      • Creating a NAT template
    • 5.3.7 IP QoS
      • Definition
      • Overview
      • Configuration
      • Queues
      • Meter
  • 5.4 Connections
    • Overview
    • 5.4.1 ATM
      • Overview
      • Phonebook
      • Adding a phonebook entry
      • Connection Service Name
      • Virtual Channel Identifiers (VPI and VCI)
      • QoS Book
      • Interfaces
    • 5.4.2 Routed PPPoE
      • Introduction
      • Creating a Routed PPPoE connection entry
      • Additional configuration
      • Routing
      • Other
      • Statistics
    • 5.4.3 Routed PPPoA
      • Introduction
      • Creating a Routed PPPoA connection entry
      • Additional configuration
      • Routing
      • Other
      • Statistics
    • 5.4.4 Routed PPPoI
      • Availability
      • Introduction
      • Creating a Routed PPPoI connection entry
      • Additional configuration
      • Routing
      • Other
      • Statistics
    • 5.4.5 Bridged Ethernet
      • Overview
      • Bridged Ethernet
      • Bridge properties
      • Add a new Bridge port
      • VLAN
      • VLAN interface overview
      • VLAN interface configuration
    • 5.4.6 Routed Ethernet
      • Introduction
    • 5.4.7 Routed IPoA
      • Creating a new Routed IPoA Ethernet Interface
      • Generated IP routes
    • 5.4.8 PPTP-to-PPP Relay
      • Overview
    • 5.4.9 Virtual LAN
      • Concept
      • The Virtual LAN page
      • Creating a new VLAN
      • Using VLAN
  • 5.5 Local Networking
    • Overview
    • 5.5.1 DHCP
      • Overview
      • DHCP Server
      • Server Config
      • Server Leases
      • Address Pools
      • Address pool types
      • DHCP Relay
      • Relay Config
      • Relay Interfaces
      • DHCP Client
    • 5.5.2 DNS
      • Overview
      • Configuration
      • Hostname Table
    • 5.5.3 Managed Switch
      • Overview
      • Managed Ethernet Switch
      • Mirror Configuration
    • 5.5.4 Wireless
      • Availability
      • Overview
      • Access point settings
      • Network Name (SSID)
      • Network Name broadcast
      • Interoperability Mode
      • Channel
      • Enable/disable the wireless interface
      • Security
      • Security Mode
      • WEP
      • WPA-PSK
      • WPA
      • Access Control
      • Associated stations
      • Networks
      • Other Networks
      • WDS
  • 5.6 Firewall
    • Overview
    • 5.6.1 Policy
      • Firewall levels
      • Buttons
      • Loose UDP tracking
      • Game & Application Sharing Allowed
      • Proxying allowed
      • Read only
      • Creating a firewall rule
    • 5.6.2 Log
      • Introduction
  • 5.7 VPN
    • Availability
    • Overview
    • 5.7.1 LAN to LAN
      • Tabs
      • Configuration procedure
    • 5.7.2 VPN Client
      • The VPN Client page
      • Configuration procedure
    • 5.7.3 VPN Server
      • The SpeedTouch™ as VPN Server
      • Configuration procedure
    • 5.7.4 Certificates
      • Certificates pages
      • Secure Storage page
      • Request Import page
      • CRL page
      • CEP page
    • 5.7.5 Advanced
      • When to use
      • How to use
    • 5.7.6 Debug
      • Status page
      • Statistics page
      • Logging page
      • Tear Down All Tunnels
  • 5.8 SIP PBX
    • Availability
    • SpeedTouch™ SIP PBX
    • Enabling the SIP PBX
    • Overview
    • General
    • Location Service
    • Call Logging
    • Call Screening
• 6 Software Keys
  • Introduction
  • How to activate a Software module
• 7 Troubleshooting
  • Introduction
  • Topics
  • 7.1 General SpeedTouch™ Troubleshooting
    • SpeedTouch™ does not work
    • SpeedTouch™ unreachable
    • Poor SpeedTouch™ performance
    • 7.1.1 Wired Ethernet Troubleshooting
      • LAN LED does not light up
    • 7.1.2 Wireless Ethernet Troubleshooting
      • Not able to connect wireless clients
      • No wireless connectivity
      • Poor wireless connectivity or reach
    • 7.1.3 Upgrade Troubleshooting
      • Error messages
  • 7.2 UPnP™ on Windows XP Systems
    • SpeedTouch™ not detected by UPnP™ or IGD Control Client
    • Adding UPnP™
    • Adding IGD Discovery and Control
  • 7.3 Reset to Factory Defaults
    • Resetting your SpeedTouch™
    • Software reset
    • Hardware reset
• Need more help?