RCA 605 - Manual (Page 128)

118 E-DOC-CTC-20051017-0151 v1.0
Chapter 5
Expert Configuration
Ping tests and results To start/stop a ping test:
1 Select the ping test entry.
2 Click:
 Activate to start the ping test.
 Deactivate a ping test that is currently running.
To view the results of the ping test:
1 Select the ping test entry, if needed.
2 Click Result.
To overview a history of ping tests:
1 Select the ping test entry.
2 Click History.
Traceroute The Traceroute table provides a list of configured traceroute test entries.
By default no traceroute tests are configured. To add a traceroute test see Add/
delete a traceroute test below.
Per traceroute test entry following information is shown in the table:
 an intuitive Test name of the traceroute Test
 the traceroute test entry Owner
 the traceroute Target Address (host or IP address)
 the traceroute test Status, being either:
 Stopped
 In Progress
Select a traceroute test entry to:
 Modify traceroute test properties .
 Perform a traceroute test and view test results and history (see traceroute tests
and results ).
 Delete the entry (see Add/delete a traceroute test ).