Ricoh IS 2245 - Manual (Page 33)

Control Panel
21
1
Display Panel
The display panel shows machine status, error messages, and function menus.
The function items displayed serve as selector keys. You can select or specify an
item by lightly pressing them.
When you select or specify an item on the display panel, it is highlighted like
. Keys appearing as cannot be used.
Important
❒ A force or impact of more than 30 N (about 3 kgf) will damage the display
panel.
Note
❒ The following display is of a machine with the optional 2 Tray finisher and
LCT installed.
The copying screen is displayed as default after power on.
Common key operations
The following keys are common to all screens:
❖ Key list
[OK] Acknowledges a selected function or entered values, and then returns
to the previous display.
[Cancel] Deletes a selected function or entered values, and then returns to the
previous display.
[UPrev.] [TNext] Moves to the previous or next display when all items cannot be shown
on the same display.
[OK] [Yes] Closes displayed messages.
[Clear] Cancels entered values but does not change the settings.
[Exit] Returns to the previous display.
AdonisC4-AE_zen_F_FM_forPaper.book Page 21 Thursday, May 12, 2005 3:32 PM