Ricoh IS 2245 - Manual (Page 44)

Combined Function Operations
32
2
*1 Simultaneous operations are only possible once the preceding job documents are all
scanned and [Next Job] appears.
*2 You can scan a document once the preceding job documents are all scanned.
*3 Simultaneous operations are only possible with an additional line installed and
when the fax function is not using the line given priority in the facsimile settings.
*4 During stapling, printing automatically starts after the current job.
*5 Stapling is not available.
*6 Simultaneous operations become possible after you press [Next Job].
*7 During parallel reception, any subsequent job is suspended until reception is com-
pleted.
Limitation
❒ Stapling cannot be used at the same time for multiple functions.
Note
❒ A machine with the 1000-sheet finisher installed, that is printing with the sta-
pling operation on paper larger than A4 size, starts the subsequent job (for
which the finisher shift tray is specified as the output tray) only after the cur-
rent print job finishes.
❒ While printing is in progress, scanning using another function may take more
time.
AdonisC4-AE_zen_F_FM_forPaper.book Page 32 Thursday, May 12, 2005 3:32 PM