Radio Shack PRO-72 - Manual (Page 11)

11
3. If you are installing individual batteries, insert six AA
batteries in the battery holder as indicated by the
polarity symbols (+ and –) marked on the battery
holder.
4. Slide the battery holder or battery pack into the com-
partment as shown.
Caution: The battery holder or battery pack fits only
one way inside the battery compartment. Do not
force it.
5. Replace the cover.
When battery power is low, BATT flashes and the scanner
beeps about every 3 seconds. Immediately replace all six
non-rechargeable batteries, remove and recharge all six
rechargeable batteries, or recharge the battery pack.
Caution: Always dispose of old batteries promptly and
properly. Do not bury or burn them.
20-566.fm Page 11 Thursday, August 5, 1999 8:04 AM