Radio Shack PRO-72 - Manual (Page 28)

28
2. Use the number keys to enter the channel number
where you want to store the frequency, then press
PGM again. Or, repeatedly press PGM until the
desired channel number appears.
3. Use the number keys and DLY/ • to enter the fre-
quency (including the decimal point) you want to
store into that channel.
4. Press E to store the frequency.
Notes:
• If you entered an invalid frequency in Step 3,
Error appears, the channel number flashes,
and the scanner beeps three times after you
press
E . Simply repeat Steps 3 and 4.
• Your scanner automatically rounds the entered
frequency down to the nearest valid frequency.
For example, if you enter a frequency of
151.4730, your scanner accepts it as 151.4700.
• If you entered a frequency that is already stored
in another channel, dUPL (duplicate) and the
lowest-numbered channel containing the dupli-
cate frequency flash for about 3 seconds. To store
the frequency anyway, press
E again.
5. Repeat Steps 2–4 to store more frequencies into
channels.
20-566.fm Page 28 Thursday, August 5, 1999 8:04 AM