Radio Shack PRO-72 - Manual (Page 36)

36
SPECIAL FEATURES
DELAY
Many agencies use a two-way radio system that might
have a pause of several seconds between a query and
a reply. To avoid missing a reply, you can program a
2-second delay into any of your scanner’s channels.
Then, when the scanner stops on the channel,
DELAY
appears and the scanner continues to monitor the channel
for 2 seconds after the transmission stops before it re-
sumes scanning.
You can program a 2-second delay in any of these ways:
• If the scanner is scanning and stops on an active
channel, quickly press
DLY before it starts to scan
again.
• If the desired channel is not selected, manually select
the channel then press
DLY .
• If the scanner is searching, press DLY during the
search.
DELAY appears and the scanner automatically adds a 2-
second delay to every transmission it stops on.
To turn off the delay, press DLY when DELAY is displayed.
LOCKING OUT A CHANNEL
You can scan existing channels faster by locking out a
channel that has a continuous transmission, such as a
weather channel.
To lock out a channel, select the channel then press
L-OUT . L/O appears.
20-566.fm Page 36 Thursday, August 5, 1999 8:04 AM