Radio Shack PRO-72 - Manual (Page 48)

48
TROUBLESHOOTING
If your scanner is not working as it should, these sugges-
tions might help you eliminate the problem. If the scanner
still does not operate properly, take it to your local Ra-
dioShack store for assistance.
Problem Possible Causes Remedies
The scanner
does not
work at all. The AC or DC
adapter is not
properly connect-
ed. Be sure the adapt-
er is plugged into
a working AC out-
let or cigarette-
lighter socket, and
is fully inserted
into the scanner’s
PWR/DC 9V jack.
The internal batter-
ies/battery pack
needs to be re-
charged, or the
non-rechargeable
batteries are dead. Charge the re-
chargeable batter-
ies or battery
pack, or replace
non-rechargeable
batteries with
fresh batteries.
Poor or no
reception. Improperly con-
nected antenna. Be sure the anten-
na is properly con-
nected.
Programmed fre-
quencies are the
same as birdie fre-
quencies. Avoid program-
ming frequencies
listed under “Bird-
ie Frequencies” on
Page 40.
20-566.fm Page 48 Thursday, August 5, 1999 8:04 AM