RCA 27F524T - Manual (Page 10)

Connecting the Device
This connection allows you to connect a device that has Y Pb Pr (component video)
jacks, for example, a DVD player.
audio cables are color
coded- Red= right
audio; white= left audio
• To review other
connections, go to the next
page.
• If you are done connecting
devices to your TV, go to
page 11 to complete the
Initial Setup.
• If you want more details of
the jacks on your TV, go to
page 1.
DIG•ANA
GUIDE
+•?
CH LIST
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
INPUT
button
Component Video
cables (Y Pb Pr) are
color coded- green,
Blue and Red
Using the example of a DVD player:
1. If necessary, connect your cable and/or antenna as described on page 5.
2. Connect your Y Pb Pr component video cables.
Connect three video cables or special Y Pb Pr cables to the Y Pb Pr jacks on the
back of the TV and to the Y Pb Pr outputs on the DVD player. Y Pb Pr cables are
colored green, blue and red. Just match the colors on the cables to the Y Pb Pr
jacks.
3. Connect your audio cables.
Connect the audio (white and red) cables to the AUDIO R and L (COMPOSITE
INPUT) jacks on the back of the TV and to the audio output jacks on the DVD
player. Just match the colors.
Important - When using the Component video input (Y Pb Pr) jacks, use only
the Audio R/L jacks from the COMPOSITE INPUT for this connection.
Viewing the Picture from the Connected Device
The device in this example, a DVD player, is connected to the TV’s Y Pb Pr jacks. To
view the DVD player:
1. Turn on the TV and the DVD player.
2. Press the INPUT button on the remote control to toggle through the Video Input
Channels until you see CVID displayed in the channel banner.
Connections & Setup
 Chapter 1