RCA 27F524T - Manual (Page 30)

 Chapter 
Setup Menu
Auto Channel Search Allows you to choose your signal type and begin
an Auto Channel Search.
Press the left or right arrow button to choose among the signal sources
below:
• Antenna If you have connected an antenna to the ANTENNA/
CABLE INPUT, choose Antenna. Refer to page 5 for a complete
explanation of these connections.
• Cable If you have connected cable to the ANTENNA/CABLE
INPUT, choose Cable. Depending on which package you have you
can receive analog, digital or both stations. Refer to page 5 for a
complete explanation of these connections.
After you have made the selections above, press the down arrow button
to highlight Start.
• Start Press the right arrow button to start the search. Searches
for channels the TV is receiving and stores them in the channel list.
This step can take some time, depending on your content provider.
The Lists & Labels menu is displayed. Go to page 11 (Auto Channel
Search) for more information.
• Search percent Number displayed indicates how much of the
search has been completed on analog and digital signals.
• Analog Channels Shows the number of analog channels found as
they are being searched. These are searched for first.
• Digital Channels Shows the number of digital channels found as
they are being searched. These are searched for last.
List & Labels Edit the channels in the list or choose labels for each
channel. Select Lists & Labels from the SETUP menu and press the right or
left arrow button.
• Channel Press the right or left arrow button to select the channel
number that you want to give a label. Press the down arrow button
to highlight Label.
• Label For example, if channel 12 has the call letters WXYZ, you
can use this feature to label it WXYZ so it appears on-screen as part
of the Channel Banner.
1. Press the right arrow button to highlight the first space.
2. Use the number buttons on your remote to spell out your new label.
For example, above the number button 7 is the label PQRS. The
letter P is typed by pressing the number 7 button one time; the letter
Q is typed by pressing the number 7 two times; the letter R is three
times and the letter S is four times.
3. Move spaces with the right and left arrow buttons.
4. Use the up arrow button to highlight Go Back and press OK to exit
this menu when you have finished.
SETUP
Go Back
Auto Ch. Search < > ...
List & Labels
...
Closed Caption ...
Favorite CH ...
Language English...
Format 4:3
Go Back
Channel 10...
Label
In list
LISTS AND LABELS
< >
Go Back
Signal Type
Cable...
Start Running...
Search Percent 20%
Analog Channel 8 Found
Digital Channel 0 Found
AUTO CHANNEL SEARCH
Using the TV’s Menu System