RCA 27F524T - Manual (Page 9)

Choose Your Connection
There are several ways to connect your TV, depending on the devices you want to connect
and the quality of the signal you want to achieve. Connections will vary according to the
types of output jacks the devices you want to connect can accommodate.
Back of TV
go to page 5 for
instructions on
getting a signal.
COMPONENT VIDEO
Y Pb Pr
VIDEO
INPUT
L R AUDIO
VIDEO
OUTPU
T
S-VIDEO
OUT
S-VIDEO
IN
L R
AUDIO
L R
AUDIO
COMPONENT
(CVID) INPUT
COMPOSITE
(VID) INPUT
AUDIO/
VIDEO
OUTPUT
COMPONENT
(CVID) INPUT
ANTENNA/
CABLE
INPUT
DIGITAL/
ANALOG
DVD player
2
3
Y Pb Pr (Component Video) Connection
IMPORTANT - If you aren’t receiving a picture with this connection, the problem might
be with your DVD player. If the DVD player is “progressive scan” DVD player, you need
to change the setting from progressive to interlace. The procedure for changing this on a
DVD player varies. Look for a button on the front of the DVD player (it might be called
resolution or display), or see if there is a switch on the back (it might be labeled “int/prog”
or something similar), or the item might be in the menu system of the DVD player. Consult
your DVD player owner’s manual for instructions.
Continues on next page...
Chapter 1 
Connections & Setup