Roland PCR-80 - Manual (Page 122)

122
Basic operation
Snapshot mode (SNAPSHOT)
Once you have set the various controllers to the desired settings, you can transmit a detailed
description of this state in the form of a “snapshot”. When you execute this function, the current
values of the controllers (
[R1–R8] , [S1–S8] ) will be transmitted.
This is convenient when you want to record the state of these controllers together at the beginning
of a song in your sequencer, as the initial values.
fig.snap-1_80
1
Simultaneously press the [MEMORY] button and the [MIDI CH] button.
The [MEMORY] and [MIDI CH] buttons will light.
2
Press the [ENTER] button.
The [MEMORY] button and [MIDI CH] button will blink several times.
The snapshot will be transmitted.
1 2