On-Q/Legrand 364732-01 - Manual (Page 18)

15
301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057 www.onqhome.com
(800)-321-2343
Innovations in Home Living.
Limit Management Station
Click to enable this function.
Section 1 MAC
Address
Enter the first management station’s network adapter MAC addresss.
Section 2 MAC
Address Enter the second management station’s network adapter MAC address. If
you are only setting up one management station, leave Station 2 MAC
address with all F’s.
Block Internet
Request
Click to enable this function.
Management via
Internet This field will be automatically disabled when Block Internet Request is
checked. If Block Internet Request is not enabled, you can choose to
enable/disable this function.
Below are the results of checking or not checking the Block Internet Request and HTTP management for this
device. (V: Checked and O: Unchecked)
Block Internet
Request
Management Via
Internet
Result
V O (automatically) WAN requests over TCP 113 (IDENT) and ICMP are
rejected.
HTTP management is not allowed.
O V WAN requests over TCP 113 (IDENT) and ICMP are
accepted.
HTTP management is allowed.
O O WAN requests over TCP 113 (IDENT) and ICMP are
accepted.
HTTP managements is not allowed.
Modify the configuration port Enable
Check to modify web configuration port number settings.
Web Configuration port Input the port number for web configuration. The default
web port for configuration is set to 80. If you want to set
the port to another port, input that port number and click
SAVE. Once the web configuration port is modifiied,
configuation over web should be checked with the new
setting; e.g. if the web configuration port was set to
8080, to login the web configuration, you need to input
the address like:
http://192.168.1.254:8080 (where
192.168.1.254 is your local port IP address.)
Non-standard FTP port number Enable
Check to modify the standard FTP port number.
FTP Port Number Enter the new FTP port number (default is 21).
SAVE
After changing the setting(s), click SAVE to save the
setting(s)
UNDO Click UNDO to clear all the settings on this page.