On-Q/Legrand 364732-01 User Manual
Page 9
6
301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057
www.onqhome.com
(800)-321-2343
Innovations in Home Living.
NOTE: No user name is required and the default password is left blank.
2. To logon, just click OK (see Figure 5).
NOTE: At the setup home page, the tabs at the top of the page are provided to link you directly to the
desired setup screen. You can select Internet Port, Local Port, Advanced Setup (Management, Virtual
Server, Packet Filter, Static Route, Dynamic DNS), Network Status (Connection Status, Sessions List,
Users List) and Others (Factory Reset, Save Configuration, Firmware Upgrade).
C. Internet Port Setup
This screen (see Figure 6) contains settings for the Internet (WAN) connection interface to your service
provider. Click on the down arrow to select your specific Internet connection mode on the list
(configure only one).
Obtain configuration automatically
(CATV dynamic mode)
For users who are using Cable Modem Internet
service.
PPPoE (DSL dynamic mode)
For users who are using xDSL Internet service
that runs PPPoE. If your xDSL service uses
PPPoE, after installing the IP Sharing device, do
not run PPPoE software on your computers.
Static configuration
Select this item when the ISP assigns static IP
address for your account.
Figure 5
Figure 6