On-Q/Legrand 364732-01 - Manual (Page 23)

20
301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057 www.onqhome.com
(800)-321-2343
Innovations in Home Living.
D. Static Route
You can create static routes (see Figure 15) to manually administrate the network topology/traffic when
the dynamic route is not effective enough. As mentioned before, static routes may be required by the ISP
if you utilize a leased line for network access or for use with virtual servers. To create static routes, select
“Static Route #1” or “Static Route #2”, and enter the appropriate destination network/host settings.
When finished, click “SAVE” to save settings. Click “UNDO” to clear all entries.
Figure 15
As discussed before, you may be required by the ISP to link a particular PC or server’s network interface
card to a provided service (see Figure 16). Enter the appropriate information as directed by the ISP.
Figure 16