On-Q/Legrand 364732-01 - Manual (Page 10)

7
301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057 www.onqhome.com
(800)-321-2343
Innovations in Home Living.
1. CATV dynamic Mode (Cable Modem)
Selecting this mode (see Figure 7) enables you to obtain dynamic IP address from your ISP via
DHCP support. Once the IP address is obtained, you can access the Internet.
For most cases, this page needs no input. However, some ISPs may require some information for
identification purpose. For example: Device/Computer name and Domain Name; please enter the
information required to complete the settings.
Device Information
Adapter Address
This field is grayed out, because the Adapter Address is not
supposed to be entered randomly. Do Not alter the contents
unless you are sure it is necessary to modify your MAC
address. To modify the address;
check Modify and enter the desired MAC address.
Device/Computer Name Enter a descriptive name for identification purpose. Some
Internet Service Providers (ISP) requires this information,
and if that is the case, they will provide you with the name.
Domain Name For example: yourcompany.com. The maximum input for
this field is 32 alphanumeric characters and it is case
insensitive. Note: 1. Your ISP may ask you to input a
certain domain name. 2. Domain name is also required for
internal network’s email and news functions.
IP Config This field is grayed out for the IP address is obtained
dynamically
DNS Configuration
DNS Server
Select Dynamic or Static. Enter the information of Primary
and Secondary DNS Server provided by your ISP when
Static configuration is selected.
Check to modify
the MAC address
when necessary.
Figure 7