Vitek VT-1662 - Manual (Page 6)

6
ENGLISH
18. The “microwaves” button
Press the “microwaves” button and use the
digital buttons (20) to set the cooking time.
Maximal cooking time is 99 min. 99 sec.
19. The “jet defrost” button
This button is used to defrost products
according to the preset time. The defrost
process starts from the high power level,
gradually (automatically) decreasing. The
indication (30) will be lighting on the display
during the whole defrost cycle.
20. The “10-1 minutes, 10-1 seconds”
digital buttons
Digital buttons are used to set the cooking
time or the product weight.
21. The “express” button
Press this button to select one of the four
preset microwave cooking programs ac-
cording to the time.
22. The “combi.2” button
Press this button to set the combination
cooking time.
23. The “stop” button
Press this button to cancel the preset power
level, cooking mode or the defrost time.
Note: The “stop” function does not cancel
the current time.
DISPLAY (9)
24. The “weight defrost” mode indication
25. First stage cooking indication
26.
Digital information/current time indica-
tion
27. Second stage cooking indication
28. Switching-On time setting mode indica-
tion
29. The “LOCK” mode setting indication
30. The “jet defrost” mode indication
31. The “grill” mode indication
32. Cooking mode 1 indication
33. Flashing dots
34. Cooking mode 2 indication
35. Operating mode indication
Microwave oven assembly
Remove the package and the accessories
from the operating chamber. Check the
oven whether there is deformation or not.
Pay special attention to the door state. If
there is some problem do not set and do
not switch on the oven.
Protective covering
Case: If there is protective covering, re-
move it from the surface.
Do not remove light grey mica plate inside
the operating chamber; it serves to protect
the magnetron.
Setting the glass tray
1. Set the roller ring with glass tray support
(6) in the opening situated on the bottom
of the operating chamber.
2. Carefully set the glass tray (3) on the roll-
er ring (6). Never set the glass tray with
its bottom upside down.
• Do not prevent rotation of the glass tray
while operating the oven.
• During cooking always use glass tray and
the roller ring with tray support.
• Products and cookware should be always
set only on the glass tray.
• The glass tray can rotate clockwise/anti
clockwise. It is normal.
• If cracks or chops appear, stop using
the unit immediately or replace the glass
tray.
SETTING
• Before switching on the unit, make sure
that the voltage and the power consump-
tion in your home socket corresponds to
the voltage specified on the unit. Connect
the unit to the socket with secure ground-
ing.
• Set the unit on the flat stable surface.
Place the unit out of the reach of chil-
dren.
1662.indd 6 1662.indd 6 24.06.2008 12:47:46 24.06.2008 12:47:46