Omega Vehicle Security freedom OM-550 - Manual (Page 25)

OM-550 u 20 u
3.2 PAPER INSTALLATION
1. Unwind several inches of paper from the paper roll.
2. Fold the end of the thermal paper over creating a straight flat edge as shown in
Figure 3-2. This creates a strong edge and allows the paper properly center in
the printer when inserting it into the rear paper slot.
Paper orientation is very important because only one side is coated for thermal
printing.
Figure 3-2
3. Insert the paper into the rear paper slot as shown in Figure 3-2. Turn the OM-
550 “ON”, then press and hold the “PAPER FEED” key to feed the paper through
the printer.
Figure 3-3
4. After the paper appears in the front window, pull several inches through.
5. Test the operation of the printer & paper-feed mechanism by turning the unit
“OFF” and back “ON”. When finished examine the printed messages for clarity.