Oricom 8000 - Manual (Page 31)

30 ADVANCED SETTINGS
6. Enter the number you (up to 10 digits) want it replaced with
and press [ ].
7. Press [ ] to return to standby.
NOTE
If you do not enter a number for “Detect Digit” then the “Prefi x number” will be
dialled prior to the number you call, (useful for access to “lo-cost” telephone
service access). To disable the auto-prefi x function, delete the contents in both
“Detect digit” and “Prefi x number” settings.
The auto-prefi x function will not work if you Press TALK before dialling.
To set Country
1. Press [ ], scroll [ ] or [ ] to ADVANCED SET and press
[ ].
2. Scroll [ ] or [ ] to SEL. COUNTRY. Press [ ].
3. Enter the 4 digit master PIN and press [ ].
4. Scroll [ ] or [ ] to select Australia or New Zealand.
5. Press [ ] to confi rm and [ ] to return to standby.
To turn intrusion on
When an external call is taking place, another handset registered
to the base can join in, making the call a 3-way conference, just by
pressing [
]. To enable this, Intrusion must be switched On.
1. Press [ ], scroll [ ] or [ ] to ADVANCED SET and press
[ ].
2. Scroll [ ] to INTRUSION. Press [ ].
3. Scroll [ ] or [ ] to ON or OFF.
4. Press [ ] to confi rm.
5. Press [ ] to return to standby.