Oregon Scientific BAR888RA - Manual (Page 10)

10
EN
TEMPERATURE
This product can display current, minimum, and
maximum temperature information collected by the
remote sensors and main (indoor) unit.
Outdoor data is collected and displayed every 40
seconds. Indoor data is collected and displayed every
10 seconds.
SELECT TEMPERATURE UNIT
Slide the ° C / ° F switch into the desired location. The
switch is located in the battery compartment of the main
unit. The setting for the main unit overrides the remote
sensor setting.
SELECT CHANNEL NUMBER
Press CHANNEL to switch between sensors 1-3.
The icon shows the selected sensor.
KINETIC-
WAVE
ICON
Designated Indoor Remote Remote Remote
Display Display Display Display Display
Channel 1 Channel 2 Channel 3
MINIMUM / MAXIMUM RECORDS
Press MEMORY to toggle between current, maximum
(MAX) and minimum (MIN) records. To clear the records,
press and hold
MEMORY for 2 seconds. A beep will
sound to confirm that the memory has been cleared.
MOON PHASE
The Calendar must be set for this feature to work. Press
or to view the moon phase for the next or previous
day. Press and hold or to scan quickly through
the years (2001 to 2099).
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent
To auto-scan between sensors, press and hold CHANNEL
for 2 seconds. Each sensor’s data will be displayed for 3
seconds. To end auto-scan, press
CHANNEL or MEMORY.
BAR888RA_EN_R15 4/12/05, 9:43 AM 10