Oregon Scientific BAR888RA User Manual
Page 11
11
EN
RESET SYSTEM
The
RESET button is located inside the main unit
battery compartment. Press
RESET when you change
the batteries and whenever performance is not behaving
as expected (for example, unable to establish radio
frequency link with remote sensor or
atomic
clock).
NOTE When you press RESET, all settings will return
to default value, and you will lose all stored information.
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing
it in a high-traffic location.
WARNINGS
This product is designed to give you years of service if
handled properly. Observe the following guidelines:
•
Never immerse the product in water. This can cause
electrical shock and damage the product.
•
Do not subject the main unit to extreme force, shock,
or
fluctuations in temperature or humidity.
•
Do not tamper with the internal components.
•
Do not mix new and old batteries or batteries of
different types.
•
Do not use rechargeable batteries with this product.
•
Remove the batteries if storing this product for a
long period of time.
•
Do not scratch the LCD display.
Do not make any changes or modifications to this
product. Unauthorized changes may void your right to
use the product. The technical specification of this
product and contents of this user guide are subject to
change without notice. Images not drawn to scale.
BAR888RA_EN_R15
4/12/05, 9:43 AM
11