Oneida Air Systems 10 HP - Manual (Page 9)

V. Configuration Examples
Sleeve Kit - Sleeve-Kit 14 for C-2500
cyclone requires 16” - 18” for a single
drum and 24” for 2x drums. Additional
feet of flex can be purchased to make
the sleeve kit longer if needed.
Drum - Standard 55 gal. steel drums
are usually 35 - 36” high Oneida Air
sells 55 gal. and 35 gal. fiber and steel
barrels with metal lids and snap on
rings.
55 gal. fiber - 35.5” high 22” dia.
35 gal. fiber - 23” high 22” dia.
55 gal. steel - 35.5” high 22” dia.
Rotary Air Locks - Provide an
alternative to an air tight dust bin for
larger volume capacity and less
maintenance. The airlock maintains an
air tight seal which allows material to
drop out into an open container.
A 10” Airlock will drop 1.85 cu. ft. / rev.
of material.
Plenum inside
Flex
Hose
Metal
Drum
Rotary
Air
Lock
O.A.S. 2007 c 10 HP Pulley Drive Owner’s Manual
Cyclone wall
mounted with
angle iron
brackets
Cyclone -
Fan/Blower outside
Hoppers - see Accessories page
Dust Box - Can be any height. For
efficient pre-separation there must be
an air tight seal between cyclone and
dust bin.
Air Tight Dust Bins can be used as support for cyclone as well as provide large
capacity dust storage.
External
Cartridge
Filter
6’, 8’,
or 10’
Tube
Filters
5 Gal.
Buckets
Fan / Blower
Stand
Splitter
Kit
(2) 55 Gal.
Drums
Cyclone Fan/Blower and filters can
be placed in different locations.
8