Oricom ECO70 - Manual (Page 20)

18 ANSWERING MAChINE OpERATION (ECO700 ONLY)
The base has a built-in digital answering machine with
a recording capacity of 11 min. The answering machine
can be operated remotely and features the possibility of
recording two outgoing messages (OGM 1 and OGM 2)
(maximum of 2 min).
There are 2 possibilities:
• With OGM 1, the caller has the possibility to leave a
message
• With OGM 2, only the outgoing message is given
without the caller having the opportunity to leave a
message
The max. recording time for each incoming message = 3
min.
An internal voice will state various information, such as day
and time of the call. The language of the internal voice is
stated on the packaging!
LED Display
The LED display on the base indicates how many
messages you have received. When there are new
messages, the 2x 7 segment LED display on the base
will blink and indicate the amount of new messages. If
the answering machine is switched off, the LED display
does not light up. "FL" will be shown on the display when
the internal memory is full and no new messages can be
recorded.
Outgoing Messages
Two outgoing messages of 2 minutes can be recorded
(OGM1 and OGM2).
• Outgoing message 1 for the answering function and
possibility for callers to leave a message.
• Outgoing message 2 for the answering function without
allowing callers to leave a messages on the machine.
Recording outgoing messages (OGM 1 or OGM 2)
• Press and hold the [ ] key to select the OGM.
• Press the [ ] key for two seconds.
• Record the outgoing message after the beep.
• Press the Stop key [
] to stop recording.
Playback the Outgoing Message
To check the outgoing message now set:
• Press the [
] key.
Note:
• It is only possible to select an outgoing message if the
answering machine is turned on.
• If the memory is full, only outgoing message 2 can be
selected (only answering without recording messages).