Oricom ECO70 - Manual (Page 23)

21
• Press [ ] button to confirm setting and jump to next,
it will prompt "Set hour", pause then prompt current hour
in 24 hours format. Press [ ] or [ ] to select
hours.
• Press [ ] button to confirm setting and jump to
next, it will prompt "Set minute", pause then prompt
current minute. User would press [ ] or [ ]
to select minutes
• Press [ ] button to confirm setting, it will prompt the
newly set day, hours and minute then back to standby or
off mode.
Operation
If a call is received and the answering machine is turned
on, the answering machine will automatically pick up the
line after the set number of rings. If
• Outgoing message 1 has been selected, it will be
played. After the outgoing message, a beep will be
heard and the caller can leave a message (of a max. 2
minutes).
• Outgoing message 2 has been selected, it will be
played. After the beep, the line will automatically be
disconnected. The caller does not have the possibility to
leave a message.
Note:
•
If, during pick-up, nothing is said for 8 seconds, the
line will be automatically disconnected.
• The 2x7 segment LED will flash and alert the user
that a new message is recorded.
Recording a Memo
You can record memos. These memos are considered an
incoming message that can be picked up later by the user.
The max. recording time for a memo is 3 minutes.
• Press the [
] key for 2 seconds. After the beep,
say your memo.
• Press the Stop [ ] key to stop recording.
Playback of Incoming Messages and
Memos
• Press the [ ] key to play the messages and memos.
• The messages are played one at a time. If there are new
messages, only the new messages (those that have not
been heard) are played.
• During playback, you can:
– go to the beginning of the current message by pressing
the [ ] key once.
ANSWERING MAChINE OpERATION (ECO700 ONLY)