SUUNTO Stinger - Manual (Page 31)

29
The displays can be preset in the Surface Mode. If it is not active, enter it by selecting
the Dive Mode. The preset display will remain active until another display is selected.
The preset displays will be the default displays in the Diving Mode. The other
available display can be accessed by pressing the + or - button. After five seconds
the display changes back to the default preset display automatically.
3.1.3.1. PRESETTING TIME ALARM
The alarm clock is set in the Setting Mode, ALM. For further information see chapter
4.2.
3.1.3.2. PRESETTING DIVE ALARMS
The dive alarms (dive time alarm and maximum depth alarm) are set in the Setting
Mode, DIVE AL. For further information see chapter 4.5.
3.1.4. BOOKMARK
It is possible to make special marks in the profile memory during a dive. These
Bookmarks will be shown as a Diver Attention Symbol when scrolling the profile
memory on the computer display (Fig. 3.7). The Bookmarks will also be shown as
annotations in the PC-software, Suunto Dive Manager. To make a bookmark on the
profile memory during a dive press the S button. The Diver Attention Symbol will
be displayed to confirm the bookmark. In the Gauge mode pressing the S button also
resets the stopwatch.