SUUNTO Stinger - Manual (Page 73)

71
3. Press S to change the selection in the following sequence:
-> On/OFF status -> hours -> minutes
4. While the alarm status [On/OFF] is selected (blinking) press + or - to change the
status. When the alarm status is On, the daily alarm indicator ( -symbol) in the
bottom right corner of the display indicates that the alarm is on.
5. Set the other sections as follows:
• While any other digits (except alarm status) are selected (blinking), press + to
increase the value or - to decrease it. Holding down either button starts the scrolling
of the current selection.
• The 12-hour or 24-hour format of the alarm matches the format of the timekeeping
display, which is selected in the Time Adjustment Mode (see chapter 4.1.). When
using the 12-hour format of the alarm, take care to set the time correctly as morning
(AM) or afternoon (PM).
6. After you have set the daily alarm, press the M button to save the settings and to
return to the Setting Mode [SET].