Onkyo TX-SR606 - Manual (Page 71)

71
Adjusting the Listening Modes —Continued
On the Listening Mode Preset menu, you can specify a
default listening mode for each of the audio formats sup-
ported by each input selector. The AV receiver will then
select the listening mode automatically depending on the
format of the input signal. You can still select the other
listening modes, although the default listening mode will
be used the next time you turn on the AV receiver.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
Listening Mode Presets
1 Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ]
buttons to select “5. Listening
Mode Preset,” and then press
[ENTER].
3 Use the Up and Down [ ]/[ ]
buttons to select an input selec-
tor, and then press [ENTER].
The audio formats supported by that
input selector appear.
For the TUNER input selector, Analog
is the only format available.
4 Use the Up and Down [ ]/[ ]
buttons to select an audio for-
mat, and use the Left and Right
[
]/[ ] buttons to select a lis-
tening mode.
Only listening modes compatible with
the audio format can be selected (see
pages 58–63).
Analog/PCM: Specifies the default lis-
tening mode for analog and PCM
sources.
Dolby Digital: Specifies the default lis-
tening mode for Dolby Digital sources.
DTS: Specifies the default listening
mode for DTS sources.
D.F. 2ch: Specifies the default listening
mode for 2-channel (2/0) stereo sources
in a digital format, such as Dolby Digi-
tal or DTS.
D.F. Mono: Specifies the default listen-
ing mode for mono sources in a digital
format, such as Dolby Digital or DTS.
Multich PCM: Specifies the default
listening mode for multichannel PCM
sources, such as DVD-Audio (input via
HDMI).
192k/176.4k: Specifies the default lis-
tening mode for high resolution
192kHz and 176.4kHz digital sources,
such as DVD-Audio.
Dolby TrueHD: Specifies the default
listening mode for Dolby TrueHD
sources, such as Blu-ray or HD DVD
(input via HDMI).
DTS-HD Master Audio: Specifies the
default listening mode for DTS-HD
Master Audio sources, such as Blu-ray
or HD DVD (input via HDMI).
DSD: Specifies the default listening
mode for DSD multichannel sources,
such as SACD.
5 When you’ve finished, press the
[SETUP] button.
Setup closes.