Oreck Air - Manual (Page 12)

12
Replacing the Filters
IMPORTANT: Always remove the protective plastic
packaging from the filter before installing the filter.
1. Unplug the air purifier.
2 . Open the Cover by gently pulling from the bottom
corners.
3. Press the two hooks above the Pre-Filter, pull straight
out of the Cabinet. Thoroughly rinse the pre-filter
and let it air dry before placing it back in the cabinet.
Note: Do not use heated or compressed air as part
of the drying process.
4. Remove the used Odor Filter and HEPA filter. Note:
Do not dispose of the odor filter’s plastic frame.
5. Remove the plastic bag from the filters.
6. Place the filters back in the Cabinet in the following
order: HEPA filter, Odor filter, and Pre-Filter.
Note: Insert Odor Filter into its plastic frame
before inserting into the unit.
2
3
4
6
5