Oreck Air - Manual (Page 13)

13
Filter Reset Mode
1. The indicator light will come on when a filter may need
to be replaced.
*
2. When the indicator light comes on, press the Mood But-
ton to find out which filter needs to be replaced:
Forced Reset Mode
When you have replaced a filter before the filter
replacement light is illuminated:
1. Press and hold the reset button for 1 second (forced reset).
2. Push the speed button to select the replaced filter. When
both low and medium speed lights are illuminated, replace
both filters.
3. To complete forced reset, press and hold the reset button
for approximately 1 second.
When the auto button is pressed or 20 seconds have passed in
the forced reset mode, the forced rest mode is cancelled.
1. After installing a new filter replacement, press and hold
the reset (MOOD) button for approximately two seconds
to set reset.
Note: If the AUTO button is pressed or twenty seconds
have passed in reset mode, the reset mode is cancelled.
Press and hold to reset filter
Low Speed Light
Indicates Odor Filter is in need of replacement
Medium Speed Light
Indicates HEPA Filter is in need of replacement
* Filter life will vary by usage and environment.
1
3
2