Oreck Air - Manual (Page 15)

15
Adjusting the Air Sensor
The purifier is shipped with the air sensor set to standard
sensitivity. Adjust the sensitivity of the sensor if you want
the air purifier to adjust its fan setting in Auto Mode to
change more frequently or less frequently.
To adjust the sensitivity of air sensor:
1.
Turn the power On.
2. Press the AUTO and SPEED buttons simultaneously for
one second.
3. The speed indicator blinks according to the current
sensitivity of the air sensor.
4. Press the SPEED button for the desired sensitivity.
5. Press the AUTO and SPEED buttons simultaneously for
one second to set the sensor.
Note: If ten seconds have passed while in the setting
mode the new setting will automatically be set.
Sensitive Standard Insensitive
Speed Low Medium High
1 2 3
4
5